Tamiya TEU-101BK and spectrum sr3000 possible?
 

Hi

I have been reading through some forums and have found people saying that there reciever has smoked because the tamiya esc and the receiver don't have a BEC's?
I don't no if i really want to try it to be honest if thats whats gonna happen?

Thanks for any help

Brad

p.s building this on christmas day, and will put up pics...

Hi, there is absolutely no problem with the 101bk and sr 3100, i currently have 3 101's on 3100's and they are all fine and have been through extended use with 4 cell and 6 cell and even li=po , the 101 can be a bit glitchy if run on the aux port, use the batt/bind port for best results, just make sure you have it plugged into the Batt and the polarity is correct

sorry, i meant the sr300, which you can't plug the red wire into i don't think, apparently it has to go in the aux port on the receiver.

also will the 7.2 volts fry the servo? the sr300 doesn't have a BEC

Brad

hi ,just been reading , it does say on the 101 instructions that it should be used with BEC recievers, so i wouldnt risk it, especialy if others have run into problems with the stated combo.