Setup needed for b4 at worksop indoor.
 

Im new and struggling, anybody got any setups for worksop indoor please.
cheers phil.:confused:

Hi Phil

I think you go to Louth club ?

My B4 FT is set as follows

Plastic chassis
Silver springs all round
35 WT oil front no2 piston
30 WT oil rear no1 piston
wishbones level at front
driveshafts level rear

gearing 23/81 on Novak 7.5L
Lipo mounted towards the front ( foam pushing it forward )


I also run 30 degree castor blocks with one washer under the ballstud for the inner ink.

Trishbits brass blocks front and rear, lead under lipo.

I managed 4th in the B using the above setup with a bit of slipper advice from Mick Cragg ( Thanks Mick ! :) )

You`ll love the racing, just dont expect to do any good cos the standard there is incredible.

That should get you somewhere near :)

Thanks for that mate, will be a great help to get me started. was struggling for front end grip on sunday, but was a great day. See you at Louth after xmas or worksop on the 3rd. cheers phil:thumbsup:

No worries Phil - they all understeer on power, thats the nature of the beast, its a matter of discipline with the throttle. Easier said than done though :)

Have a good Xmas. :thumbsup: