mardave v12 servo
 

just wondering which is the best type of servo to put in my mardave i have a spare ace servo and some cheap nasty servos.just wondering if i put the ace servo in will this draw more power away from the motor than a cheap servo cheers

i had an ace ds1015 in mine for a while , i didnt notice any more power difference from the motor , but it was just a bit of overkill , in the old mardave :lol: .. i then fitted a futaba 3305 mg servo , and that was ok , not as quick ( steering wise ) but it done the job ....

now its been removed , as the mardaves for sale ....:)

scanner rc in mine and did notice a diffrence over the futaba s3001
Will never go back!
So the more monny you spend the better!

use a cheap sevro as ul need to money for new mardave motors every month :O)

don't try this one as it doesn't like 4 cell with the 4 cell M'tronics eac in the FIM Sidecar

so went back to cheap as chips in mine but have installed a TQ voltage booster to raise volts supplied to receiver to power the servo.

Glen ment this servo Ansmann Racing High Torque Metal Gear Servo / Ar135000030 http://www.apexmodels.com/gbu0-prods...135000030.html

that's the one :thumbsup: and edited my link above :blush: