oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   JConcepts (http://www.oople.com/forums/forumdisplay.php?f=23)
-   -   no traction (http://www.oople.com/forums/showthread.php?t=3528)

woohaa19 03-05-2007 10:14 PM

no traction
 
hi i was racing at oswestry the weekend with my bj4 we and from a standing start i was wheel spinning the diffs were tight and the slipper was tight to can any recomend or think of what might be wrong:(

chears mike

PaulRotheram 03-05-2007 10:21 PM

explain more what you mean? do you mean the wheels kept spinning giving no traction.. or somthing was slipping when it shouldnt of?

what electronic set up are you running? possibly some crazy brushless? you may have too much power..

if not, then look at the slipper, or make sure the diffs are not overtight.. if they are solid then there wil lbe no give in the transmission at all.

please be abit more specific on the problem.. and ill do mi best to help ya!

woohaa19 03-05-2007 11:02 PM

the wheels are spinning dnt think i have over tightend the diffs they feel fine and not running brushless yet might c what happens if i turn the rate down on my transmitter
mike:)

BenG 04-05-2007 08:12 AM

Quote:

Originally Posted by woohaa19 (Post 37267)
the wheels are spinning dnt think i have over tightend the diffs they feel fine and not running brushless yet might c what happens if i turn the rate down on my transmitter
mike:)

Make sure the slipper is set to instructions in the manual. If it is to tight, it wont be slipping correctly, and giving you too much power off jumps and standing starts,

If you can, turn punch (on the ESC) or throttle response curve (on the tranny) down.

That way, the wheels will spin slower of the mark, and you'll have some more traction.

woohaa19 04-05-2007 11:20 AM

thanks will try that let u know how i go on :)

bigred5765 04-05-2007 11:27 AM

slow down your thumb, lol

woohaa19 04-05-2007 11:37 AM

or i could try that lol

SPRCIAL AGENT 04-05-2007 12:16 PM

Get some new tyres???

The bj has more traction than most other 4wd cars so if you are lacking make sure you have droop and the slipper is set and go through and give everything a good check to make sure it is putting the power down ok.

rb

woohaa19 04-05-2007 12:27 PM

i didnt have a problem with tyres allthough i did tighten the slipper up alot because i thought that it was it that was causing the problem

super__dan 04-05-2007 01:08 PM

Your wheels were spinning so you tightened the slipper???

So I hear you have to have the slipper on the BJ pretty tight and thread locked else it self adjusts during a run, however it losening itself you give more traction if anything.

woohaa19 04-05-2007 01:13 PM

thinking about it i dont know y i tightend it lol was just having a bad day lol wasnt thinking straight lol

BenG 04-05-2007 01:15 PM

Quote:

Originally Posted by woohaa19 (Post 37394)
thinking about it i dont know y i tightend it lol was just having a bad day lol wasnt thinking straight lol

Don't worry.

I don't think straight on a good day :D I cant read, (according to Jimmeh) and I am unable to act 'sane' ;):D


All times are GMT. The time now is 10:16 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com