cr2 convertion
 

i have had diff problems so walst the diff has been off i have decided to do a cr2convertion from the tandard chassis
i have cut the rails off and atached the rear end on but it seems all a bit flimsy on the back, is it usualy like that or do i have to put some kind of strut going from the front tower to the back ?

Yes, cutting those rails removes all the strength from that section of chassis.
When I tried that I ended up making an alloy plate for the chassis and this was bolted down via the battery clamps.
I then created an X6 style transmission to battery bar brace to try and restore the strength.

do you thnk you could send me a pic or something to my pms

Check the "I made this" section of the forum:
http://www.oople.com/forums/forumdisplay.php?f=25

It has a bunch of threads with photos on converted mid engined Losi (and others) buggies.

Avner.

Post 51 on this topic was my car, but there are several others on there too.
http://www.oople.com/forums/showthre...t=24150&page=3