oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Electrics (http://www.oople.com/forums/forumdisplay.php?f=26)
-   -   Speeedpassion GT2 (http://www.oople.com/forums/showthread.php?t=32660)

migsy 21-10-2009 01:30 PM

Speeedpassion GT2
 
just put my gt2 in my pred and i gives off interfearance like no-1's bizz.
is it caused by the wires being to close or is it the digital servo doing it?:confused::thumbdown::mad:

Help!!!!!:cry:

bigred5765 21-10-2009 01:40 PM

what radio gear and do you have a pt in there also

migsy 21-10-2009 01:45 PM

radio gear
 
Quote:

Originally Posted by bigred5765 (Post 300759)
what radio gear and do you have a pt in there also

i have gemini-2, ko servo & reciever and a mrt pt. gt speedo. ;)

sparrow.2 21-10-2009 01:49 PM

Maybe a picture of your wiring would help.

Some receivers don't like having PT's close to them. Maybe try installing it on the other side of the car or somewhere a bit further away from the receiver.

migsy 21-10-2009 01:54 PM

wiring
 
i'll get a pic on here in a bit, I will also try to move things around.
cheers for your advice..Alan:thumbsup:

bigred5765 21-10-2009 01:55 PM

if its a KO receiver and you have your pt any were near it it will go mad, move the pt as fare away from the Rx as you can and your problem should go away, if in doubt unplug it and if the problem stops you no what it was,

migsy 21-10-2009 05:35 PM

job done
 
hi matt. i've now got the pred sorted. like you were saying about the pt's, certainly dont Work around ko recievers.

soz i didnt get a pic on here, my brat had only lobbed my pc camera in the the toddlers bath tub.:lol::mad::p:lol:

CHEERS..Alan:thumbsup:

bigred5765 21-10-2009 06:27 PM

glad i could help mate,

migsy 25-10-2009 11:09 PM

Gt2 in my pred
 
I ran my pred x-11 today using the speedpassion system in there.
theres only one way i can sum it up really, very "unhappy".

when i ran one of these in 2wd i thought they were fab. for me this system in a 4wd is something that i feel needs rethinking as it just could not deliver reliability for me in my pred.

heat 1 shut down:mad:
heat 2 shut down:mad:
heat 3 had roast esc. boom boom.:mad::cry::cry::cry::thumbdown:

DCM 25-10-2009 11:12 PM

Was that 5.5 a bonded or sintered motor, as 5.5 is a little 'warm' for in there, and if you got a bonded, you are driving that much harder,


All times are GMT. The time now is 04:13 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
oOple.com