RB S7 L2G breaking
 

The gudgin pin snapped in my RB which in turn broke the piston in half during a warmup lap last month.
I have since bought a OS VZB max speed and so do not need this anymore.
For sale

RB S7 crankcase and backplate. £15.00
http://i865.photobucket.com/albums/a...02009010-2.jpg
http://i865.photobucket.com/albums/a...7102009011.jpg

RB S7 Crank £ 10.00
http://i865.photobucket.com/albums/a...7102009021.jpg

RB WS7 II head and button £20.00
http://i865.photobucket.com/albums/a...7102009015.jpg
http://i865.photobucket.com/albums/a...7102009016.jpg

RB S7 carb £15.00
http://i865.photobucket.com/albums/a...7102009012.jpg
http://i865.photobucket.com/albums/a...7102009014.jpg

RB venturi's 6.5mm and 8mm £8.00
http://i865.photobucket.com/albums/a...7102009025.jpg

All used items are not damaged and are in very good condition.

RB S7 Conrods 2 off £15.00 the pair
1 conrod was bought NEW from Mallet and has done less than a gallon.
you can see a little bit of damage to the bush on the bigend but could be remedied i think.
1 used conrod and gudginpin. replaced when Mallet pinched the liner.
left hand side of above photo

http://i865.photobucket.com/albums/a...7102009022.jpg
http://i865.photobucket.com/albums/a...7102009023.jpg
http://i865.photobucket.com/albums/a...7102009024.jpg

Rb S7 rear bearing. £10.00
This was bought from fastboy last month as i thought the back bearing was starting to wear, on hinesight it was the gudgin pin that was causing movement at TDC.
http://i865.photobucket.com/albums/a...7102009017.jpg
http://i865.photobucket.com/albums/a...7102009018.jpg
These conrods may be of use to somone

All postage is £1.50.

But open to sesnible offers.