Help - Steering servo wrong way!
 

Hi

Just finished building a b4 (out of racing for 20 years), however the servo is going the wrong way. I have bought a technipsort 2.4g radio control, however when i am going left (wheel) the servo goes the other way and vice versa. Reading the intructions it says i should be able to adjust via ATV, struggling with this. Hope someone can resolve so i get get it going! Many thanks in advance. Lee

The transmitter has a servo reversing function. It's a bit confusing to set. You have to turn the steering ATV down to the lowest value and keep the switch held until the display shows "NOR-REV". The instruction manual says 2-3minutes!

It is fiddly...

Turn wheel to full left and hold it and then move the trim to the right when it gets to 20 it will beep and reverse the servo.
Then reset your end point