b4 tool set wanted
 

i am going to buy a b4 buggy and i need a tool set .what sizes do i need i have seen some fastrax tools sets will they all fit all the screw on the b4. and what tool do i need to get the wheels off .
the tool set i have seen sizes are 050.1.16.5/64 .3/32 will they work

you will need -

Hex Drivers:
.050"
5/64"
1/16"
3/32"

Nut Drivers:
3/16"
1/4"
11/32" (rear wheel nuts)

Ryan

thanks mate can you get them in sets 1 set for the car. and a set for the wheels any link please must be cheap

thanks ryan found a set for the car just need to find a set for the wheels
nut drivers
3/16"
1/4"
11/32"
anybody got a link for any. are the just for the wheels or the car as well

the 1/4 and 3/16 are for severall nuts around the car but the 11/32 is just for the rear wheels

thanks do you know were i can get some cheap hex drivers and wheel nut drivers

These are what i use -

http://www.cmldistribution.co.uk/cml...tId=0000003019

http://www.cmldistribution.co.uk/cml...tId=0000003020

these tools are more than what i payed for the car i need cheap nut drivers :woot:

anybody know were i can get any cheap nut drivers

http://www.liquidrc.com/index.php?ze...=&dto=&x=0&y=0

I use these.

need some tools before next friday coming. so need to be in the uk

It's hard to find cheap imperial tools in the UK.

Do you have the plastic Associated tools that come with the kit. They are rubbish, but they are cheap. #6956 is the part number - not to say that they will be any easier to find than a cheap set of proper tools though.

i have found some b4 nut drivers dynmite tool .and some hex drivers inperial fastrax .thanks for the help guy i am only 14 years old and trying to start racing. but i got told i am to young for racing :confused:

Whoever told you that was probably scared you'd be quicker than him soon ;)

14 is plenty old enough! I know as I get overtaken by plenty of kids :wtf:

If you need tools try putting a wanted add in the small adds section on the bottom of the main page. Someone always has a spare set to let go.

i have tried ,they wanted £85 for tools. what i paid for the car was £100 for a rtr brushless 5.5turn ezrun and all carbon and loads of spare for a couple of years