Turnbuckle
 

hey Guys - what are the most common sizes of turnbuckle wrench used in 1/10th and what uses what size?

Ta!

schumacher,kyosho,hpi,tamiya,durnago, are all 3mm
associated,losi, are all 5/32
not sure on x11 extreme

wrench Lion-o :lol::lol::lol:

Love you.

yip 3mm turnbucle wrench CLICKY
and the std ae one that comes with the kit is 5/32 sorry cant find a link

Im sure losi is 3mm its much bigger than the AE ones.

A

thanks!

5/32 is nearly 4mm Ashley so it should be the other way around..

O now im confused but Losi are defnetly not the same sixe as AE ones. SO maybe losi are 5/32 and AE are smaller im not very good with this imperial buisness.

A

I've got one of these http://images.amainhobbies.com/image.../losa99165.jpg

it seems to cover most turnbuckles

is that the dual sized one,?

I think that does 3 4 and 5 so suffices but not perfect on the 5/32.

pred is 3mm and 4mm. if you are doing a wrench the pred one will need to be thin for the wishbone tops and damn strong as well. standard thin alloy snaps ;)

Hey Nathan..

What gap is there for the top arms then - how much space have we rh play with and is it the 3mm or 4mm which is needing to be thinner?

you have pm