oOple.com Forums
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Wanted (http://www.oople.com/forums/forumdisplay.php?f=7)
-   -   b4 ball cup for rpm rodend (http://www.oople.com/forums/showthread.php?t=29983)

stampede vxlboy 06-09-2009 02:43 AM
b4 ball cup for rpm rodend
 
need b4 ball stud short to fit rpm rodend somebody must have some :thumbsup:
somebody must have some old 1 lying about in there tool box plz need some cash waiting

General Accident 06-09-2009 06:59 AM
Stampede, which one is it? There are short and long ones on the B4. If you could say which part of the B4 it came from that will help someone to hopefully help you.

stampede vxlboy 06-09-2009 11:17 AM
its to fit the rpm rod ends as my balls are too big the different on my madrat

stampede vxlboy 06-09-2009 06:46 PM
somebody must have some lying about short stud for rpm rodends

coolcars782 06-09-2009 07:23 PM
I got some standard b4 ball cups

stampede vxlboy 06-09-2009 07:36 PM
will they fit rpm rodend on as the sudends are to big on my car

coolcars782 06-09-2009 07:39 PM
Sorry mate have no-idea

stampede vxlboy 06-09-2009 07:46 PM
how much for 12 are the b4 studends cheap as its just for bashing

stampede vxlboy 06-09-2009 08:09 PM
get back to me as i need them :)

Jony P 06-09-2009 08:16 PM
:-)
 
... :)

stampede vxlboy 06-09-2009 08:41 PM
plz get back to me as i need them studends plz for the b4

MRD 06-09-2009 09:05 PM
The madrat is metric and the b4 is imperial so the threads are different. You need the Hot Bodies D4 ball studs. Look on the Hot Bodies web site and get the part numbers for the lengths you need then search ebay or order them from your local hobby shop.

Col 06-09-2009 09:29 PM
Good advise, Mark

Benh 06-09-2009 10:49 PM
I have a bunch of Hot Bodies rod ends.

How many do you need.

I have all the D4 ones, all are new and have never ran on a car.

If you need more info on them, please go to www.wheelspinmodels.co.uk they have a lot of pics for Hotbodies gear.

stox217 07-09-2009 12:08 AM
The length of the ball cup is the same as the b4 length so it should be fine!

stampede vxlboy 07-09-2009 12:13 AM
have you got any ?

MRD 07-09-2009 11:15 AM
I think there's a bit of confusion here. By the sound of it he already has the ball cups (rpm whites) but they wont fit the larger ball studs on his madrat so he needs the standard size ball studs so he can use the rpm ends he has. Like I said before the ones for the job are the hot bodies D4 ones so if anybody has any spare ball studs (not ball cups) then thats what he needs.

super__dan 07-09-2009 03:22 PM
If I've got this straight though, if he's trying to retrofit imperial (smaller) ball studs onto pre used metric (larger) places then won't the threads be too large already. Surely you'd have to keep the larger ball studs and buy new plastic cups.

Personally what I'd do is walk into a model shop and ask them to sort it out. From geographical location I've seen in other threads I'd go to MB models in Leeds as Bally knows his onions and will sort it all out.

MRD 07-09-2009 04:15 PM
Quote:
Originally Posted by super__dan (Post 283331)
If I've got this straight though, if he's trying to retrofit imperial (smaller) ball studs onto pre used metric (larger) places then won't the threads be too large already. Surely you'd have to keep the larger ball studs and buy new plastic cups.

Personally what I'd do is walk into a model shop and ask them to sort it out. From geographical location I've seen in other threads I'd go to MB models in Leeds as Bally knows his onions and will sort it all out.
Read my earlier post ;)

Tom3012 07-09-2009 05:21 PM
Quote:
Originally Posted by stampede vxlboy (Post 282748)
as my balls are too big
Cant believe nobody said anything.... :woot:


All times are GMT. The time now is 05:30 PM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com