One way for ZX5-FS
 

Hi,

I bought 2 ZX5's when I got back into 4WD.

1 x ZX5-FS used and built
1 x ZX5 std car newly built with some spares

I promptly sold on the standard car, keeping some of the spares, including 75% of the parts for making a front one-way.

Looks like I am missing a one way bearing (or possibly 2) and some other bits. Is there a parts list for building one anywhere or can someone post a picture/exploded diagram of the components and a built one-way for me to refer to?

I assume a one-way will be the same across both the ZX5 standard kit and the FS kit as the gearboxes are the same? Only the layout of the spur/cells etc is different?

Cheers,

Dan

one way
 

http://www.petitrc.com/setup/kyosho/...azerZX5SP.html have a look at this web page pal you can down load the manual and have a look at what you need then for the parts http://www.microtechracing.com//prod...e=LAZER+ZX%2D5 try these mate they seam to be the best for zx5 spares

Cheers Matt, do you also know if the diff bevel gear is similar to any other car such as pro 4 or yok sd?

bevel gear
 

no i havent got a clue mate i know if you buy the bevel gear set from kyosho you get all the gears in the 1 bag for the front and rear and the 1 way bevel

Use the Kyosho ones, very good quality and will last very well if messed properly