oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Team Losi Racing (http://www.oople.com/forums/forumdisplay.php?f=17)
-   -   Stock front wing on XXX-CR (http://www.oople.com/forums/showthread.php?t=29312)

stical 23-08-2009 08:29 PM

Stock front wing on XXX-CR
 
Good evening everybody,

I've had a look at the Downforce kit which I fully understand but the stock
front wing that is included with the stock body totally has me puzzled :confused:

I do get how I mount it but what it should look like is a total mystery to me.

Does it just fill the hole on your front shock tower if that makes sense ?

Anybody got pictures of LOSA8118 mounted on their car ?

Cheers,
Erik

Belsten 23-08-2009 08:47 PM

Its held in place on the front body mount, with a body clip. Shell goes on 1st, then the wing on top, then the clip

stical 23-08-2009 09:51 PM

:thumbsup: Thanks but as I stated I know how to mount it.

I still got a new stock XXX-CR body and need to cut out the front wing but I don't understand what shape it has thus don't know how to cut it .

Anybody can enlighten me ?

stical 24-08-2009 07:16 AM

An image says more than words
 
I'm guessing that the Losi Front wing supplied with the stock XXX-CR body does the same thing as the JConcepts Front wing on a B4.

Is this how the Losi wing looks like when installed ( I know this is a B4 on that picture but does it fill the Front Shock tower ) ?

http://www.jconcepts.net/index.php?/...ail_details/32

peetbee 24-08-2009 08:31 AM

There should be faint cut lines moulded into it, I know there was on mine.
If you can't see them I'll take a photo of mine when I get home so you can see the shape.

stical 24-08-2009 08:45 AM

Quote:

Originally Posted by peetbee (Post 278208)
There should be faint cut lines moulded into it, I know there was on mine.
If you can't see them I'll take a photo of mine when I get home so you can see the shape.

I'm afraid the cut lines are so faded I can hardly tell how to cut.
If you could post me a picture how it looks installed,that would be awesome :thumbsup:

Thanks for the help

peetbee 24-08-2009 09:16 AM

No problem, will be late this evening though I'm afraid.

pugboy 24-08-2009 12:18 PM

The std front wing on the CR body moulding is a bit pointless IMO, there is a high downforce kit with a slightly more substantial one, or jconcepts do a front wing for the cr too which uses the same fixings (i.e. screws through the front bulkhead).

peetbee 24-08-2009 10:12 PM

Sorry this is the best I could do. Never realised how difficult it is to photograph clear lexan!
http://www.oople.com/forums/picture....pictureid=2302

stical 25-08-2009 08:12 AM

Mystery solved
 
:thumbsup: A big , big thank you :thumbsup:

It is very clear to me now how I should cut out the front wing.
For some reason mine is rather dark so the lines are very hard to see, it's more of a guess.

I know what to do now on this rainy day ( at least here in Belgium ) .

peetbee 25-08-2009 09:29 AM

No problem, have fun!


All times are GMT. The time now is 09:35 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com