more sales
 

more added hpi savage air filter £3 posted
brand new never used hitec hs 311 servo specs.£5 posted
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.19sec/60° at no load
Operating Speed (6.0V): 0.15sec/60° at no load
Stall Torque (4.8V): 42 oz/in (3.0 kg/cm)
Stall Torque (6.0V): 49 oz/in (4.5 kg/cm)
Current Drain (4.8V): 7.4mA/idle, 160mA no load operating
Current Drain (6.0V): 7.7mA/idle, 180mA no load operating
Dead Band Width: 5usec
Operating Angle: 45° one side pulse traveling 450usec
Direction: Multi-directional
Motor Type: Cored Metal Brush
Potentiometer Drive: 4 Slider/Direct Drive
Bearing Type: Top Resin Bushing
Gear Type: Nylon
360 Modifiable: Yes
Connector Wire Length: 11.81" (300mm)
Weight: 1.52oz (43g
TRAXXAS 2055 SERVO SOMETIMES WORKS SO SOLD AS REPAIRS OR SPARES
HSP MICRO FAILSAFE £5 POSTED
AND A NIKO MULTI CHARGER HAS 4 ADAPTERS ON THE END CHARGES NIMH AND TX
INPUT 230V AC 50HZ
OUTPUT 5.6V DC 250 MA- 8.4V DC200 mA- 11.2V DC150 Ma £6 posted
and a 1600 intalect mini hump pack has had 4/5 charges 8 posted
http://i673.photobucket.com/albums/v...Picture128.jpg
http://i673.photobucket.com/albums/v...Picture129.jpg
http://i673.photobucket.com/albums/v...Picture130.jpg