oOple.com Forums - Robitronic overloader charger

as title , very little use, still boxed with instructions ,mint condition with temp lead £50.00 POSTED

paypal gift or you pay fees

pm or email [email protected]

http://www.microtechracing.com/produ...25DBBFE%7D.jpg
http://www.microtechracing.com/images/clear.gif http://www.microtechracing.com/images/clear.gif

This Charger is a high performance computerized battery maintenance system. Capable of charging, discharging, cycling and conditioning multiple rechargable battery types, with very high output power, a customized display with expertly designed software and programming controls, the Overloader is easily one of the smartest and most powerful R/C battery maintenance systems available!

Features

Perfect for all electric models
Flexibility of handling multiple battery types
Large blue backlight graphic LCD shows all informations
Stores up to 10 different charge profiles
Discharge batteries with 0.1~20 Amps to an adjustable discharge level
Performs 1-10 cycles for NiCd/NiMH only and stores capacity & voltage data
Top off charge for NiMH batteries for fully charging without overheating
Built-in timer for delayed charge start
Break-in electric motors
Intelligent cooling FAN control system
LCD contrast, fan operation, temp scale and sound cues are fully adjustable
Various warning messages for improper input voltage, wrong connections, unsuitable battery condition or reverse polarity on output
Blue anodized aluminum case
Specifications:

Case size: 176x134.7x52.9 mm
Weight: 730 g
Input voltage: 11 - 15V DC
Battery type & cells: 1 - 10 cells - NiCd & NiMH / 1 - 4 cells - Li-Ion & Li-Po
Battery capacity: 100 - 9900mAh
Charge current: 0.1 ~ 8.0A adjustable (1C max for Li-Ion/Li-Po)
Charge methods: Linear, reflex, impulse and 4-step
Charge termination: Peak detection & zero delta V for NiCd/NiMH / constant current/constant voltage for Li-Ion/Li-PO)
Delta Peak Sensitivity: 0 - 25mV adjustable
Trickle charge current: 0 - 500mAh ONLY for NiCd & NiMH
Top-off charge: 0 - 1000mAh ONLY for NiMH
Discharge current: 0.1 ~ 20A adjustable (2C max for Li-Ion/Li-PO)
Discharge cutoff voltage: 0.1 - 1.1V per cell NiCd & NiMH / 2.5 - 3.7V per cell Li-Ion/Li-PO
Temperature cutoff: 10 - 55�C (50 - 132�F)
Cycle count: 1 - 10 cycles ONLY for NiCd & NiMH
Cycle cool-off delay: 1 - 30 minutes adjustable
Battery memories: 10 memories
Display type: 8-line, 21 character graphical LCD
Motor break-in: 1.0 ~ 8.0V adjustable / 1sec ~ 24h adjustable and 10A constant