oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   X-Factory (http://www.oople.com/forums/forumdisplay.php?f=16)
-   -   What do I need?? (http://www.oople.com/forums/showthread.php?t=27962)

ex-sco77morgan 29-07-2009 09:32 AM

What do I need??
 
Hi just bought the car below and other than Losi shocks (got) rudebits brass weight kit is there anything else I need to put on this X6 squared.

http://www.oople.com/forums/showthre...429#post269429

Any help would be great thanks

c0sie 29-07-2009 09:34 AM

CustomBlitz sprayed bodyshell? lol

Looks like you have a tidy complete setup there big fella :)

ex-sco77morgan 29-07-2009 09:36 AM

Excellent........

Was hoping someone would say that :D

(Shock oil arrived this morning:thumbsup: we are rocking)

c0sie 29-07-2009 09:39 AM

You'll have to speak to ye olde Haggis and ask him what oil to run with the X6, and if we need to put any limiters in the shocks before we build em on Friday mate :)

Should be along the lines of 40wt, red pistons, blue springs on the front and 30wt, orange pistons and pink springs for the rear :)

ex-sco77morgan 29-07-2009 09:41 AM

Think I've seen somewhere 35/32.5 front with black springs and red pistons with 30/27.5 rear with pink and red pistons. Ordered those o rings as well :D

c0sie 29-07-2009 09:43 AM

Good lad. Those NorTech whities are the nuts :)

:thumbsup:

ex-sco77morgan 29-07-2009 09:55 AM

can you PM me your address bud putting bits in post for you deleted other PM cheers

Lee 29-07-2009 10:17 AM

We pretty much always start off with 32.5/35wt with a red piston up front and 25wt red piston in the rear.

I havent run anything heavier in the rear since i ran nimhs;)

ex-sco77morgan 29-07-2009 10:43 AM

Losi shock oil set (20 upto 50) arrived today so I'll start with 25 you reckon in the rear. Going to go Rudebits kit as well though will that matter.

Tony if your reading this have you got one there ready for posting buddy ?

Darren Boyle 29-07-2009 11:01 AM

I dont think Tony is about at the moment, I believe he is on holiday......

ex-sco77morgan 29-07-2009 11:07 AM

Ok thanks Darren, anything I might need on this car buddy??

Darren Boyle 29-07-2009 11:08 AM

Get it on the track and drive it mate..........

ex-sco77morgan 29-07-2009 11:17 AM

Fair enough, best put some electrics in it then :thumbsup:

jono83 29-07-2009 11:53 AM

Quote:

Originally Posted by Lee (Post 269448)
We pretty much always start off with 32.5/35wt with a red piston up front and 25wt red piston in the rear.

I havent run anything heavier in the rear since i ran nimhs;)

Neither have i thats always what i start with. with 25 in the rear it feels very soft but it works lol

mrspeedy 29-07-2009 12:07 PM

Of coarse a Phat Bodies Zen bodyshell and front wing makes all the difference ;)

Danosborne6661 29-07-2009 12:12 PM

Got to be done, you seen my shell at the weekend Scott rather than the X6 boat :D

Body Paint 29-07-2009 12:22 PM

Quote:

Originally Posted by c0sie (Post 269435)
You'll have to speak to ye olde Haggis and ask him what oil to run with the X6, and if we need to put any limiters in the shocks before we build em on Friday mate :)

Should be along the lines of 40wt, red pistons, blue springs on the front and 30wt, orange pistons and pink springs for the rear :)

If that is the setup you had on your squared that'll be why it understeered like a pig!

Body Paint 29-07-2009 12:28 PM

Caldicot setup for you Scott.

http://www.oople.com/forums/attachme...3&d=1248684570

ex-sco77morgan 29-07-2009 12:31 PM

Oh you are a gent....

When it goes outside, sutle changes or big changes??:confused:

Body Paint 29-07-2009 12:40 PM

Change ride height, move front axles down and move rear shocks to inside hole on wishbone if tracion is low. Maybe 25 weight rear oil if traction is very low.


All times are GMT. The time now is 11:34 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com