![]() |
lipo charger forsale
lipo charger and balancer turnigy 420 0.5 to 2amps 2cells to 4 cells with mains power and .12v £25 with postage its take about 1 hour to do a 4000mha battery
|
What sort of mains lead does it come with, I thought it on had 12v input via crocidile clips:confused:
|
Quote:
|
Quote:
|
Quote:
|
still for sale:thumbsup: £25 for lipo charger
|
still here if anybody need a lipo charger 2cells to 5 cells :thumbsup:
|
i know yours includes the mains power but would you take £20 all in? also do you have a picture
|
Does it come with instructions?
|
its to simple to use it .there two port for 7.4v 1 port for 11.1v and a 14.8v ports .this cost me £35 for the charger. and mains lead was £25 as well. £25 for it or i will keep it as a spare:thumbsup:
|
Quote:
|
no its as not got any instructions
|
I think it's a valid point, someone asked a direct question and you either missed it or ignored it.
|
Wot's the max charge rate for 7.4v if it goes up to 5amps with 8.4v cut off i'll take it ?
|
|
Here are the specs, just to help vxlboy out with this a bit. . .
The Turnigy 420 is a simple and easy to use balance charger which can handle 2 to 4 cells and charge at a rate of 2A. With an input voltage of around 12v you will be able to use wall adapters or a car battery to power this unit. The 420 will also show you battery percentage full during charge. Spec. Operating voltage range: 11.0~18.0Volt Charge current range: 0.5A~2.0A Lithium bettery cell count: 2 to 4S Weight: 356g Dimensions: 133X83X35mm This charger charges via the balance plug which is a JST-XH style. All Zippy and Rhino batteries will fit. |
sounds like an ideal charger for Micro racing. You may want to list it on UK-microrc.com as you may have more luck there.
|
Not sure if my post was missed but this would be ideal for my mini e revo so would you take £20 posted?
|
i sent you messages say £25 it going to cost 6 or 7 pounds to send it to you. its all boxed up as well :thumbsup:
|
ah no worrys then il grab one from hobbycity on my next order
|
All times are GMT. The time now is 01:45 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com