Losi Xcelorin LOSB9500 problem
 

Help!

Trying to set-up my Xcelorin speedo with packaged 6.5 Losi sensored motor - have followed the instructions several times to calibrate to transmitter and I do have steering BUT just cannot get throttle....only thing which gives throttle is if I manually spin the motor pinion by hand then it revs up to full rpm, braking on the tx stops it then full brake gives full throttle again....very strange and annoying.

I have tried 3 different sensor leads, which I know work, so have ruled that out.

Is this a sensor issue with the motor or could it be the ESC?

I have another 6.5 motor and another brushless speedo so will try mixing and matching to fault find but before I switch on the soldering iron has anyone got any bright ideas?

Thanks,

Dan

are all the endpoints on the tranny set to 100%

Yes, must be something wrong as even when tx is at neutral the motor will spin up to full rpm if given a manual turn by hand......:eh?:

It just started working perfectly! Will give it a test run, thanks anyway! Fingers crossed....do I need to run it with fan for a 6.5 in off road??

2wd or 4wd?

4WD small grass track 10:1 ratio

Ide leave the fan on it

A

Re Losi
 

Dan just read your text. Tried to Pm you but inbox full?. Will call you later.

Thanks Chris, seems to be ok nowm not sure what was wrong - I stripped the motor and cleaned it and it works ok now....