hyper 7 setup HELP
 

ive seen the seup sheet on cml with half of the setup info missing for the front end http://www.hobaoforums.co.uk/forum/s...t/rolleyes.gif
i just want a bit more on power or initial bite on the steering.

current setup is; (from set up sheet)

med size medium grip bumpy track
front
0 toe 0 camber
upper arm hole 1
stock caster
45wt shock oil with stock pistons and shocks
white springs with 5mm spacer
top shock position 5
lower shock position 1
steering slider position a
level wishbone ride height
rear
stock toe
level ride height
0 camber
45wt oil stock shocks white springs 5mm spacer
top shock pos 2
camber link pos 2 inner pos 1 outer
lower shock pos 1
wing in pos 1

diff oil 7k f,5k c,2k r
proline crimefighters m3
14t bell

im using tp 995 servos,ko 301f and helios with the steering punch up to about 50%

any pointers?