HOT NEWS - X6 Complete Distribution Weight Kits
 

X-Factory X6 Parts
5 different packs available
Pack 5 is the comprehensive kit with full instructions


(pack 5 which includes pack 1 + 2 + 3 + 4 + Ellis Stafford 'secret winning' instructions)
X6 Brass Weight Distribution Kit
The long awaited complete weight distribution kit for the X-Factory X6
This kit is designed and used by British Champion Ellis Stafford.
The kit comprises of all the identical weights that Ellis uses and manoeuvres around the chassis for different track conditions.
All parts made from high quality brass....
The kit also comes with Full Instructions written by Ellis himself
First batch - Currently 20 in production and will be available on the 6th of July.
If you choose to buy now via the www.rudebits.co.uk website, then we guarantee yours by the Southport National (if not well before)


For those that wish to purchase items separately the following kits will be available

(pack 1) X6 Under Speedo Weight 70g
Permanently fixed in the X6 this weight is essential to the cars performance
First batch - Currently 20 in production and will be available on the 6th of July.
If you choose to buy now via the www.rudebits.co.uk website, then we guarantee yours by the Southport National (if not well before)

(pack 2) X6 Behind Servo Weight Adjustments 120g
This is a 4 piece kit that has adjustments of 1=30g 2=60g 3=90g 4=120g
Again as used by Ellis Stafford
First batch - Currently 20 in production and will be available on the 6th of July.
If you choose to buy now via the www.rudebits.co.uk website, then we guarantee yours by the Southport National (if not well before)

(pack 3) X6 Rear Corner Weights x2 38g=76g
Used in low grip conditions
First batch - Currently 20 in production and will be available on the 6th of July.
If you choose to buy now via the www.rudebits.co.uk website, then we guarantee yours by the Southport National (if not well before)

(pack 4) X6 Under Lipo Weights x2 25g=50g
Again as used by Ellis for certain track conditions including bumpy tracks
First batch - Currently 20 in production and will be available on the 6th of July.
If you choose to buy now via the www.rudebits.co.uk website, then we guarantee yours by the Southport National (if not well before)




Full details and pricing will soon be listed (within 48 hours) on the www.rudebits.co.uk website.
Any questions or more details please email [email protected] or feel free to visit www.rudebits.co.uk


Reserve yours to avoid any disappointment!
Thanks for looking and regards to all

RudeBits Website
 

The www.RudeBits.co.uk website has just been updated with all the info and pricing and a PayPal buy now button for all to reserve their Ellis Stafford Distribution Weight Kits for the X-Factory X6
Thank again

wow £85....:o

I guess I will stick to my lead weights...

Agree it's not the cheapest but it is a 9 piece kit which is Fully adjustable made out of High quality brass.
Never has to be replaced, only buy once scenario

Furthermore the raw material is very very expensive and in fact some thousands of pounds of brass had to be bought in bulk just to get to this low price. If it was done by weight alone it would cost over £110 and this is not yet mentioning the accurate manufacturing of an adjustable kit or the value of our current British Champions knowledge of where and when to distibute the weight for a winning car.
Maybe buy packs 1, 2, 3, and 4 separtely as and when you want
Regards

Correction

Please note this has now been amended - the actual weight is x2 38g=76g
Many thanks once more
Photos here very very soon

All photos of the kit is now live at

www.rudebits.co.uk

Also all pricing has been revised and discounted. ;)
Please check with the website
Anyone that has pre-paid at the original price will automatically be refunded the difference :D

Thanks again

Ellis Staffords X6
 

Now pictures of Ellis Staffords' X6 with all the RudeBits attached to his chassis - stunning!! :drool:

We can also confirm that Phil Sleigh will be running the RudeBits weight distribution kit in his car.... :D

www.rudebits.co.uk

Tony how are these secured in to the chassis also is this a X6sq specific application as i dont have a squared yet

Hi yah
The kit comes with all the screws needed to mount on the chassis.
It can obviously be fixed down with double sided tape - it's a metter of choice of course.
The quad servo block is split in 4 which weigh in at 30g each and again they come with screws to fix 1 or 2 or 3 or all 4 together as and when needed for different track conditions. All of this is in the Ellis Stafford instructions that come with the kit and tells how he uses the kit to it's best for different track conditions.
Hope this helsp you.....I am also sure there are differences between the X6 squared and the original X6 - X6 squared with the weight distribution kit seems to be the way forward

They do look very naughty!!! :thumbsup:

Very nice! I like that a lot :woot:

pack 5 ordered
 

hi tony i have ordered a kit no. 5 when will they be posted?:p

its only that i cant wait to get them?????:lol::lol::lol::lol::lol:

Hi yah
The kits are being finished as I type!!!
I will not post them before the weekend as we are just waiting for some screws that are added in the main kit.
If anyone is coming to Stotfold, then I will have some kits with me and everyone elses will and should be posted on Monday.
If anyone wants me to bring them to Southport then no probs there as there should be some left by then.
Laters for now

Dont forget mine for Southport big man!

Gareth

Don't worry mate - all have been reserved for you and I WILL have it at Southport

stotfold
 

Hi Tony i will be at stotfold sunday

regards mark tarrier

Hi yah Mark
I will have yours at Stotfold matey - come and see me first thing
See yah there

Cheers tony! :p

Cheers Tony i got my weight kit today and ran my x6 squared for the first time and i must say i was reallly impressed,:p as a newbie to 1/10th 2wd this kit was awesome! :drool::drool::drool::drool::drool: