oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Team Associated (http://www.oople.com/forums/forumdisplay.php?f=24)
-   -   B4 with Losi shocks. (http://www.oople.com/forums/showthread.php?t=23693)

mikeyscott 08-05-2009 08:53 PM

B4 with Losi shocks.
 
Any comments and pics etc. as considering removing the threaded shocks on my B4

V-Rossi 08-05-2009 08:56 PM

Works and fits perfectly, but you can't use the JConcepts front spoiler with the Losi shocks, especially not when they are set on the inside position on the front shocktower. You'll have to make one like these: http://picasaweb.google.be/bnkoffroa...74417662950754

Some say Losi shocks take some 'sharpness' out of the car and make it a bit smoother, but haven't tested the difference myself. I use them on my B4 and S2 and they work great.

Darren Boyle 08-05-2009 11:00 PM

Quote:

Originally Posted by V-Rossi (Post 239009)
Works and fits perfectly, but you can't use the JConcepts front spoiler with the Losi shocks, especially not when they are set on the inside position on the front shocktower.

You should be able to....since we favour Losi shocks on the X6 quite a bit and use the JConcepts spoiler all the time on the front and the X-Factory car of course uses the whole B4 front end. We dont have any issues with certain mounting holes fouling.

mikeyscott 09-05-2009 06:53 AM

So what part numbers are required and do AE springs fit? I remember my Losi XX shocks being good.

V-Rossi 09-05-2009 09:18 AM

Is has been written a few times here, but here we go again:

LOSA5013 Shock Mount Bushings:All XXX
LOSA5015 Double O-Ring Shock Cartridge x4
LOSA5046 Shock Pistons #56, Red (4)
LOSA5049 Al Shock Adjuster NutsW/O-ring
LOSA5050 Shock Spacer Set
LOSA5054 Threaded Shock Body Set .6"
LOSA5055 Threaded Shock Body Set .9"
LOSA5060 Shock Shaft,.6" Ti-Nitride x2
LOSA5064 Shock Shaft,1.0" Ti-Nitride x2
LOSA5079 Shock Ends & Cups (4) LOSA5129 2" Spring 2.9 Rate,Orange
LOSA5130 2" Spring 3.2 Rate,Silver
LOSA5047 Shock Pistons #55, Orange (4)
LOSA5134 2" Spring 3.8 Rate,Blue
LOSA5132 2" Spring 3.2 Rate,Green
LOSA5150 2.5" Spring 2.3 Rate,Pink
LOSA5152 2.5" Spring 2.6 Rate,Red
LOSA5154 2.5" Spring 2.9 Rate,Orange
LOSA5045 Shock Pistons #57, Black (4)


This is a list for the 4 shocks and all the springs and pistons you need.

mikeyscott 09-05-2009 09:38 AM

Quote:

Originally Posted by V-Rossi (Post 239086)
Is has been written a few times here, but here we go again:

LOSA5013 Shock Mount Bushings:All XXX
LOSA5015 Double O-Ring Shock Cartridge x4
LOSA5046 Shock Pistons #56, Red (4)
LOSA5049 Al Shock Adjuster NutsW/O-ring
LOSA5050 Shock Spacer Set
LOSA5054 Threaded Shock Body Set .6"
LOSA5055 Threaded Shock Body Set .9"
LOSA5060 Shock Shaft,.6" Ti-Nitride x2
LOSA5064 Shock Shaft,1.0" Ti-Nitride x2
LOSA5079 Shock Ends & Cups (4) LOSA5129 2" Spring 2.9 Rate,Orange
LOSA5130 2" Spring 3.2 Rate,Silver
LOSA5047 Shock Pistons #55, Orange (4)
LOSA5134 2" Spring 3.8 Rate,Blue
LOSA5132 2" Spring 3.2 Rate,Green
LOSA5150 2.5" Spring 2.3 Rate,Pink
LOSA5152 2.5" Spring 2.6 Rate,Red
LOSA5154 2.5" Spring 2.9 Rate,Orange
LOSA5045 Shock Pistons #57, Black (4)
LOSA5047 Shock Pistons #55, Orange (4)

This is a list for the 4 shocks and all the springs and pistons you need.

Ok thanks I'll price it up, but was hoping they sold them as a complete pack. I assume we are talking circa £50

Darren Boyle 09-05-2009 10:02 AM

Quote:

Originally Posted by mikeyscott (Post 239093)
Ok thanks I'll price it up, but was hoping they sold them as a complete pack. I assume we are talking circa £50

Try nearer £110....

mikeyscott 09-05-2009 10:32 AM

Bugger a duck - oh well there goes part of my callout money, unless I get the knack of AE shocks very quickly.

thom.p 09-05-2009 12:04 PM

You can try ebay.

V-Rossi 09-05-2009 12:50 PM

Or buy a cheap second hand XXX-BK2 or CR and use the shocks and slipper. These shocks may be twice the budget, but are also twice as fun to work with :)

mikeyscott 11-05-2009 07:33 PM

Will the shocks from an XXXCR fit?

jono83 11-05-2009 07:50 PM

yep those are the exact ones you need i had a cr before my x6 so i swapped the shocks straight over. the ones off a losi 4wd well the rear ones are to long and give to much droop and not enough up travel

mikeyscott 11-05-2009 07:51 PM

I'm looking at a 4wd kit to rob them off, so I'll look for a 2wd version

jono83 11-05-2009 07:59 PM

the fronts are identical you could get them off a 4wd but you would need these parts to replace the bodies and shafts on the rears

LOSA5055 Threaded Shock Body Set .9"

LOSA5064 Shock Shaft,1.0" Ti-Nitride x2

mikeyscott 11-05-2009 08:00 PM

Quote:

Originally Posted by jono83 (Post 239828)
the fronts are identical you could get them off a 4wd but you would need these parts to replace the bodes and shafts

LOSA5055 Threaded Shock Body Set .9"

LOSA5064 Shock Shaft,1.0" Ti-Nitride x2

Mmm not too bad then. and then obviously different springs. Circa £30 for the missing parts

jono83 11-05-2009 08:01 PM

the springs for 2wd and 4wd are the same

mikeyscott 11-05-2009 08:04 PM

Cool :D time to spend some more money!

jono83 11-05-2009 08:10 PM

Good lad lol

mikeyscott 11-05-2009 08:28 PM

What springs do people recommend for astro turf?

As well as ordering the two bit mentioned above I'll need these I assume:
LOSA5013 Shock Mount Bushings:All XXX

jono83 11-05-2009 09:06 PM

yes you will need 4 but if you buy a car that already has them on you wont need to buy extra ones if you get me. as for springs on my x6 i use black blue and green front and red pink rears but am not sure if these will be correct for the b4 due to being rear motored and the x6 being mid motored

hth


All times are GMT. The time now is 06:27 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com