Lifepo4 battery for Racing car and receiver
 

Some beginning racers start to use LiFePo4 Hard case 6.4V 2500 mah 25C -30C in Janpan
the Feedback for after 3 months :
much more safety for overcharge and overdischarge no blast no fire , It is really good for new racers

we are using Lifepo4 battery for receiver batteries to apply to the gas powered R/C cars

we also start produce hard case lifepo4 for 1/10 1/12 1/18 car
Because lifepo4 Voltage is lower than Lipo, the 1/12th is more slower and easiest to drive, even 1/18th too

we have to use a different case , more little than lipo hard case


http://static.rcgroups.com/forums/im...es/biggrin.gif Maybe could be the only one in the global R/C market with lifepo4 battery

Lifepo4 battery for RC receiver
 

About receiver's batteries and transmitter's batteries using Lifepo4,
the discharge current is higher and the voltage out is lower.
but about receiver, I don't know the voltage amount in out when the battey is full charged, but if the receiver can works with that voltage, we have the solution
because R/C guys don't need to buy the voltage regulator.

if the voltage regulator is needed, we can produce a mini hard-case plastic-box and put it inside the box.

do a plastic box to put inside the voltage regulator and the LiFePo4 battery ...

I shall always be very happy to hear from you , Guys