Xray T2'007 EU
 

Has anyone got an Xray T2'007 EU version?
I just need the dimension between the chassis and top deck to see if my Lipo will fit.........seems a bit extreme to build the kit just to find out :lol:
Cheers

What lipos are you trying to fit or havent you decided yet?
i know a few people who run a 007 and will try to get you some details.
Ben

Cheers Ben
It will be a Trakpower 3600

The lipo will fit under, although it's position will be slightly forward of the nimh batters unless you grind away the bulkhead a bit at the back. Personally I just run it forward that few mm.

I run the T2'007 EU with the trakpower 3600 30C.

So no mods needed :confused:

Nice one :thumbsup:

there will be the possability of cutting part of the bulkhead

i have demon 3600 lipo and had to cut a bit away

I have removed about 2mm from under the bulkhead for my lipo's... they are demon power 5K's... had to do a bit of work on the bulkhead cross piece as well... the car's handling has not suffered as the stiffness of the bulkheads and chassis has not been comprimised... go ahead, get grinding... you'll be fine... and believe me, the chassis will be more than capable of handling the extra power... :thumbsup:

Cheers for the reply's guy's :thumbsup:

Yep, I had to cut the curved part of the bulkhead back to get lipo's to fit in the 007 and then shim the top deck for the bigger packs (4900)

With the 3600 though, you'll be fine after removing the material from the bulkhead.