oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   JConcepts (http://www.oople.com/forums/forumdisplay.php?f=23)
-   -   Which Lipo's fit? (http://www.oople.com/forums/showthread.php?t=21726)

sean0 01-04-2009 01:36 PM

Which Lipo's fit?
 
Was wondering if anyone runs a lipo in there BJ4we and which ones I can fit in it without any modifications?

Sean

chris68nufc 01-04-2009 06:03 PM

A few of us run the Demon 4200 Lipos but we have the Diggity designs Lipo brace. They are quite expensive for what you get but work well with no mods to chassis.
AE do something aswell but they werent in stock when we wanted them.

Andy Moore 01-04-2009 07:13 PM

Im not certainly on all of the LiPos which do fit the car, but I know the Checkpoint/Trackpower 4900's dont want to fit. Modifications are needed on those for sure. Jason runs the Reedy soft case 4800 Lipo Saddle locally without any issues.

N7ELA 01-04-2009 11:46 PM

the track power saddles, intellect 4200, demon 4200 and vampire 4400's all fit in without any modifications. just make sure your thumb screws are tight... oh and dont crash....

bald eagle 18-05-2009 12:42 PM

Quote:

Originally Posted by N7ELA (Post 224981)
the track power saddles, intellect 4200, demon 4200 and vampire 4400's all fit in without any modifications. just make sure your thumb screws are tight... oh and dont crash....

Do you have to buy a lipo saddle tray upgrade? or do they just drop straight in (without the nimh trays installed)?
Cheers:D

Oscar 18-05-2009 05:31 PM

Quote:

Originally Posted by bald eagle (Post 242736)
do they just drop straight in (without the nimh trays installed)?

Thats all I have done ;)

bald eagle 18-05-2009 05:38 PM

WOOHOO!!! cheers mate.. hadnt budgeted for a new tray so thats greeeaat! cheers for the info m8. :thumbsup:

Richard Lowe 18-05-2009 08:07 PM

The Demon/Vampire or Trakpower saddles won't get held in my the standard NiMh tray's, soft case packs that are a bit smaller might though. You can run without any tray's if you have to by putting velcro between the battery straps and the top of the LiPo, it's pretty secure without but with velcro they won't go anywhere ;)

andreasH 21-05-2009 07:50 PM

I use the Vampire and GM saddles (both hardcase).
I think the trays you can purchase are to expensive
so I cut myself some out of 2mm plastic.
But it was well with velcro too.

colmo 22-05-2009 12:24 AM

I just ran a LiPo (Trakpower 4900) in my BJ4 (non-WE) tonight for the first time - yes, it's designed for a stick pack, but not for batteries shaped like a brick. I just put some double sided mounting tape in between the strap and battery, then taped them together. When charging, I just lifted strap, battery and all out - the balancing port was accessible through a hole in the Associated aluminium strap I was using.

And yes, I did crash - plenty of times. Didn't budge.

This should work just as well for saddles - it might mean you need several battery straps if you have multiple batteries though...


All times are GMT. The time now is 03:34 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com