Set for x6²
 

Dear,

I'm new on oople and on X6².

I would like to know with base of set up you will use for this

http://img136.imageshack.us/img136/6...edroiteds5.jpg

http://img145.imageshack.us/img145/8195/fpifpaf1es3.jpg

The are some jump but no so hard.

I will find a video if it's better?

I use losi trumper, and in the national comptétion in france we must use the Bowtie.

So what to you think i have to in a start set up?

Thanks a lot

Ben

I tried the Brian Kinwald low bite setup from 2wdrc.com. I thought it worked well on my medium bite track. It also worked well when the traction grew. There is a thread on here about an alternative X-6 setup. Most of those guys are running this setup.

Thanks a lot. But dou you use the associated or losi shocks.

Because in here set he use the associated and i have the losi.

Thanks

I use associated! I do plan on trying the Losi shocks as I have many pairs from past Losi kits.

You could just put the ae pistons in the losi shocks.

I do a test with Ae piston, but for the spring i coud't use the ae.

Do you know the interne radio of the X6²

You can find a nice spring chart here

The X-6 transmission ratio is the same as the B4. 2.60:1

yep, this is because no matter how much or what kind of idler gears you have, they don't count for the ratio.

You can get some setup sheet for almost every surface here

And to get some comaprion between shocks, you have this thread with this document

Thanks, I will show.

first test indoor yesturady and the car whas very nice. Thanks Mr factory :thumbsup:

I hope to have the good set up for the next race like yesturday