oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Electrics (http://www.oople.com/forums/forumdisplay.php?f=26)
-   -   Saddle Lipo Queries (http://www.oople.com/forums/showthread.php?t=20849)

DaveG28 13-03-2009 09:45 PM

Saddle Lipo Queries
 
Demon have one of theirs available, leads me to 2 queries:

1. It's 4200mah but says 1c is 5 amps. Does this mean it's actually 5000mah and a lower c rating than the 35 quoted?

2. I have a trakpower type balance cable and link wire (so linkwire goes between 2 cells with the balance lead connecting into this). Presumably I can balance any saddle lipo like this, and not have to use the 3 wire lead thing included?

discostu 13-03-2009 10:29 PM

no its says charge at 1c no more than 5 amps 1c=charge at 4.2amps

DaveG28 13-03-2009 10:36 PM

Quote:

Originally Posted by discostu (Post 218200)
no its says charge at 1c no more than 5 amps 1c=charge at 4.2amps

It says on the additional info on the website "it has a 1c rating of 5, so set to no more than 5 amps MAX". Just wondered what that meant?

damo666 14-03-2009 04:16 AM

Its the charge rate.

ianjoyner 14-03-2009 08:57 AM

I've seen that on a few of Demon's packs. I don't know if there is a technical reason why a 4200 pack can have a 1C charge rating of 5 amps or if it's just Demon's way of saying it's okay to charge them at 5 amps.

discostu 14-03-2009 09:31 AM

yeah its just demons way of say its ok to charge at 5 amps.

DaveG28 14-03-2009 10:21 AM

Cheers guys. On the balancing issue, do you know if I'm right about being able to ignore the leads that come with the cell and use a TP method instead?

ianjoyner 15-03-2009 04:57 PM

Yes I think you'll be fine balancing using the TP style lead, I think the supplied lead is just to support chargers with the JST-XH balance connector.


All times are GMT. The time now is 12:05 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com