10mm hex wheels for Cat 2000
 

Hi All,


I purchased some wheels for my Cat 2000 and didn't realise they'd stopped making 14mm hex wheels about 10 years ago... :-)

So are there any adapters or tricks I can use to fit them to my Cat 2000. I've thought about shaving 2mm off each side of the 14mm hex nuts, but the wheels have a deeper (don't know what word to use..) space for the hex nuts to fit in. I guess I could pack the space with washers...


Unless there are any modern drive shafts that will fit??


Cheers,


Stuart

Plenty of 14mm hex wheels out there .


https://rover.ebay.com/rover/0/0/0?m...2F163932827081


Or if you send me the hub , driveshaft ,original wheel hex and one new wheel , I’ll machine you some adapters .

Schumacher still sell 14mm hex wheels for the Cat 2000.

https://www.racing-cars.com/wheels-t...ting=hex-9-16/

Now that sounds interesting, I'll PM you.


Cheers!!


Stuart

Well, I asked Kevin (Rs fruitbat) to have a go at making some 12mm (not 10mm) hexes for the Cat 2000. I can say with confidence that he was successful. They are a work of art and fit perfectly, as you can see in the pictures below.


Thanks Kevin!!




Stuart.


Attachment 119989

Attachment 119990

Thanks Stuart, it was a pleasure to make them for you :thumbsup:

Pmd you mr rs fruitbat