oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Electrics (http://www.oople.com/forums/forumdisplay.php?f=26)
-   -   charging lipo`s (http://www.oople.com/forums/showthread.php?t=20514)

crayon 07-03-2009 11:42 PM

charging lipo`s
 
Hi guys really new to lipo battery`s lol
what is the best way to charge my 1600mAh 20c lipo pack on my charger i can alter the mAh and Vp in charge and in discharge the Amp`s and Vp but cant alter cell amount
Thanks Jamie

the mad1 07-03-2009 11:48 PM

you need a specific lipo charger to charge lipos buddy otherwise they could go bang what charger have you got?

crayon 07-03-2009 11:49 PM

M8 its a pro-peak sigma which does do lipo`s

JJ The Boat Wizzard 08-03-2009 12:15 AM

What Car Is It For 1600Mah's small ?? Also You Want Your Charger On 1.8Amps , And What Volt The Lipo? If Its 7.4 Thats What Volt You Want It On :)

Hope This Helps
John

crayon 08-03-2009 01:00 AM

Thanks m8 it is small it for a LRP Shark/ Blaze

JCJC 08-03-2009 08:32 AM

The above is right, you need to chose "lipo charge" mode, set to 1.6 amps and 7.4volts, thats 2S1P your charger may check battery and ask you to confirm.

Do not use any other mode, do not charge on NiCad or Nimh you will have problems.


All times are GMT. The time now is 10:20 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com