MODDED TOP FORCE........
 

Hi all,

Thought I would share my Top Force Ive been working on. Fully modded with,

Carbon Fibre
Alloy Main Shaft
Polished turnbuckles
CVD Driveshafts
Alloy front C Hubs
Alloy Steering Blocks
King Pins
Alloy Motor mount
Alloy Steering
Alloy lock down battery kit
Carbon fibre Lipo cradle
Alloy rear hubs
Completely ballraced
High Cap Shocks
TRF Turnbuckle ends
Tamiya Alloy 12mm hex
2.2 Wheels Dyed Yellow
Alloy servo mounts
Stainless screws throughout
1 piece Main Drive gear and spur. Removes the Alloy gear.....:thumbsup:

CLICK TO ENLARGE PICTURES......

Very shiny :thumbsup: is it a 're 're?

Hi Daz,

Yes some of its RE-RE not all matey.:thumbsup:

That's very nice :thumbsup:

Good skills!! Turned out great

Looking good

Is it me or is the c-hubs on the wrong sides not much caster

Mvh iso

Thanks lads for your replies....:thumbsup:

Hi isobarik.

Its you !!........:):):)

No matey they are the correct way. If you double click the pictures they enlarge further.

The C Hub only goes on one way due to a machined step for the ballstud.

Just looking at my standard Top Force (ish)..... they are exactly the same as the Tamiya plastic C Hub.... just the Alloy version......:thumbsup::thumbsup: