xxx4 set up
 

hi all
what would be a good set up for the regional at york ? ie : springs/colour, tyres/ pins/spikes, or any thing else anyone can advise
Neil

This is what I used to use on my XXX4G, seemed to work pretty well on nearly every surface.

Front
Toe - 0
Ackerman - Forward
Ride Height - Wishbones level
Camber - -1
Caster - 7.5
Sway Bar - No
Oil - 50wt
Piston - Blue
Spring - Black
Spacer - Inside shock 0.120"
Front Diff - One-Way
Drive Shafts - Alu CVD
Pulleys - 42F 42R
Shock Location - 2inside
Camber link - 2
Washers - 2 Gold
Notes - Straight front hinge pins (xxx-s back blocks) + Exteneded steering arm with shorter drag link

Rear
Toe-In - 3
Pivot Support - 1R (1*)
Ride height - Level with Front
Camber - -1
Diff - Plastic (with savers)
Drive shafts - Alu CVD's
Sway bar - No
Oil - 30wt
Piston - Blue
Spring - Red
Shock Location - 2Middle (BK2 Rear arms)
VLA - Long
Hub Spacing - Back
Camber link - 2B with Trinity BK2 rear hubs 2 gold washers
Notes - BK2 rear arms with Trinity BK2 rear hubs