![]() |
Raising Knuckle Arm 22-4 Question
Hi all
I see on a lot of setups the knuckle is raised by 2mm. Is this done by shaving 2mm off the bottom of the caster block? Also am I right In thinking people flatten the camber link on the caster block? Cheers Dave |
Its done by taking 2mm from the bottom of the steering knuckle. You can do it with the plastic ones but I have snapped one so have done the same trick with the alloy knuckles. It can be done with a dremel and a steady hand.
Yes, flattening the camber mount position on the caster block is also commonly done. |
Thanks for confirming. Look here though http://site.petitrc.com/setup/losi/s.../224_TechTips/
Looks to me like they are shaving 2mm off the bottom of the caster block to achieve the same affect? |
2 Attachment(s)
yes i guess that would do the same.
here's what I've done. |
That does look very smart :thumbsup:
|
Just seen this which details the operation but removing material from the caster block, as per your earlier link.
http://losiracing.blogspot.co.uk/201...eight.html?m=1 |
Interesting about the shock changes too, cheers
|
Also take a look on that site for flattening/removing tweak from the rear shock tower. It's a pretty good resource and well maintained :thumbsup:
|
Will have a read, thanks for your help :thumbsup:
|
All times are GMT. The time now is 07:03 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com