oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Vintage RC (http://www.oople.com/forums/forumdisplay.php?f=48)
-   -   more pred info required (http://www.oople.com/forums/showthread.php?t=190314)

fidspeed 26-05-2017 09:33 PM

more pred info required
 
bit info required please pred gurus

mitchs xk 98 is almost ready to be thrash tested again on re building diff I noticed a bearing missing inside diff !!
there is a recess in one half of the diff to allow a bearing to seat and support shaft from other half of diff

the manual we have does not carry a spares parts list or assembly instructions .does anybody have any idea what size we need

thanks guys see you at iconic

(of course we will have a sensible reserve option should the pred decide to destroy itself after one run!!)

dave n mitch fid

daz75 27-05-2017 08:44 PM

Try dyna he knows all things pred

Dyna 28-05-2017 01:39 PM

Internal diff bearing is a 7x4.

Depending on which diffs you have, the earlier ones had two bearings, later ones only had one. Xk98 should have one from memory.

fidspeed 28-05-2017 05:48 PM

cheers chief

with the help of a another pred freak we have converted to b44.1 bevel and pinion gears we have a plain bush supporting large central hole in bevel gear but no bearing in recess in diff half this should help

regards dave


All times are GMT. The time now is 04:38 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com