Track star 80amp esc with 13.5 motor combo
 

Had a few of these track stars but the 120amp versions and had know bother but fitted this one for a friend and when trying to set it up once I have set the nutral zone then try to set full throttle it will not set the only way it will if I do reverse then throttle but as you can imagine you have full throttle in reverse any help would be great

Reverse the throttle channel on the radio, then start again.

Or change the rotation direction of the motor (if you can do so on the ESC)

Tried both no joy esc will not let u motor just cogs

If it's cogging I'd try factory reset, new sensor cable checking the power cables are right. Then new motor.

Only gogs when u change 2 of the wires otherwise the motor is fine

If it works fine with wires connected correctly. Leave them like that. Buggering aroundwith the phase cables on a sensored set up is asking to break something.

Something else is wrong.