oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Wanted (http://www.oople.com/forums/forumdisplay.php?f=248)
-   -   SORTED! Rc10 parts (http://www.oople.com/forums/showthread.php?t=185117)

Rs fruitbat 16-11-2016 09:27 PM

Rc10 parts
 
I'm looking for a complete slipper clutch assembly for the rc10 stealth gearbox and the two umbrella seals that fit on top of the rear shock where the cap screws onto the shock body , shocks are the gold anodised type :thumbsup:

Rs fruitbat 22-11-2016 10:20 PM

Bump :D anybody have anything :thumbsup:

Rs fruitbat 03-12-2016 06:08 PM

I'm still looking for a slipper clutch for the stealth transmission :)

Retro RC 03-12-2016 07:22 PM

Quote:

Originally Posted by Rs fruitbat (Post 962319)
I'm still looking for a slipper clutch for the stealth transmission :)

Part numbers?

Rs fruitbat 04-12-2016 07:52 PM

Quote:

Originally Posted by Retro RC (Post 962321)
Part numbers?

No idea on the part numbers sorry .

timmy 04-12-2016 10:54 PM

Better download a manual and find out then Kev...or ask Sooty

peetbee 05-12-2016 09:00 AM

Think this is what you need?
(Sorry I don't have any spare though!)
http://i61.photobucket.com/albums/h7...psfejosrfh.png

If you are looking to run it then an alternative is to fit the b4 layshaft and then you can run the b4 slipper assembly

Novice 05-12-2016 06:19 PM

2 Attachment(s)
Found these Kev are they what your looking for?
Attachment 94715

Attachment 94716

Rs fruitbat 05-12-2016 09:20 PM

These are the parts I have, in theory I need the outer plate which the spur gear is attached too , Andrew thinks he may have the part I need , I'll update the thread ,when I know I have all the parts .

http://i99.photobucket.com/albums/l3...ps4bbrxtye.jpg

Rs fruitbat 05-12-2016 09:22 PM

Quote:

Originally Posted by timmy (Post 962383)
Better download a manual and find out then Kev...or ask Sooty

Download ! I'm only running half a meg , up here in the sticks ;)

Rs fruitbat 05-12-2016 09:23 PM

Quote:

Originally Posted by peetbee (Post 962392)
Think this is what you need?
(Sorry I don't have any spare though!)
http://i61.photobucket.com/albums/h7...psfejosrfh.png

If you are looking to run it then an alternative is to fit the b4 layshaft and then you can run the b4 slipper assembly


Thanks Pete :)


All times are GMT. The time now is 04:13 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com