losi xx advice
 

Hi im building a losi xxcr to race, it would be good to give it a diff rebuild and shock rebuild. What size are the shock seals, i have looked for shock rebuild kit but no luck same with the diff. Will be running it on astro in the UK and some indoors carpet if anyone has some set up tips.
kind regards james

im sure I have seen diff rings available

if not sand with wet and dry abrasive(use wet) start around 300 grit till wear grooves disappear the gradually go finer till end up with 1200

I have just got some ceramic diffballs from hing wong ching land to trial cheaply and rc bearings do thrust race kits for losi in imperiall sizes (I got some for my xxx tourer

I have 3 losi xx and 3 xx4 to check and refurb diffs ill keep you posted of progress !!

Xx xxx
 

Hi James
I have loads of xx and xxx spares have
you got a part number for the bits your
looking for.
Cheers Jason

Thanks fidspeed i have found few diff plates but there in the US so postage is hi, think the diff balls and thrust balls are carbide so they should be ok, mine have grooves both side on my plates will try the wet and dry, i remember polishing diff plates back in the day :-)
Jk007 thanks for the reply
A-3070 Differential Drive Rings
A-3098 Differential Thrust Bearing w/Carbide Balls (Molded)
i am looking for a gear cover to none hydrodrive

Hi veeza the gear cover is the same for hydra or normal slipper have posted a ling to team blue groove repro for you in wanted section.

Also check these Gus out for the shock rebuild kits

http://www.losipartshouse.com/LOSA5015-p/losa5015.htm

Retro Rc, i forgot about blue groove just checked they have gear cover and good price thank you :-) will check the shock rebuild kits.

We have the shock cartridge rebuild in stock at DMS, see here - http://www.dms-racing.com/index.php?...ategory_id=436

We also have lots of different rebuild parts too from the likes of Losi and also MIP, as well as a huge selection of other older vintage parts, spares and accessories all on our website

Thanks Darren Boyle Dms sorted me out with some good bits for the xxcr and great price and service. is well worth a look
kind regards
james