Sanwa glitching
 

Dear All

Had an issue with my Sanwa Mt4s and the rx 462 on Sunday. Would switch on tranny ,then car and the steering would work immediately but had to wait 2 maybe 3 minutes before the ESC would power the car. Once running no issues at all. The electrics are all hobbyking motor and ESC, and have run fault free for the last 3 years in three cars.

Anyone shed any light on what the issue can be. Going to try and change the sensor cable, try recalibration of the tranny, but it causing a few head scratches, HELP. Google hasn't really helped me

Steve

Sounds like a problem a friend of mine had with his sanwa z handset his would loose all signal.

dont know about the speedo but do you need to re-calibrate it to the tranny? i had this issue and just reset it up and worked fine ever since. might also be worth increase dead zone on your throttle incase it thinks its moving slightly

Tried this again last night to try and find the issue. All seemed to be working fine again now, so I suspect it is a temperature issue, as it was bloody warm on Sunday, and I was having drive issues on the car, sorted out the diff drive issues , so could it be the ESC was overheating ? The fan on the ESC came on when the car was switched on so probably cooled the ESC over the 2 minutes waiting period.

cheers