oOple.com Forums - identity of socket and plug

oOple.com Forums (http://www.oople.com/forums/index.php)

- Electrics (http://www.oople.com/forums/forumdisplay.php?f=26)

- - identity of socket and plug (http://www.oople.com/forums/showthread.php?t=181334)

identity of socket and plug

Hi.
Does anyone know the proper name of the sensor lead plug or the name of the socket it plugs into on the motor as its that socket im after
Thanks for any help.

from the BRCA Handbook

Quote:

5.4 If the motor is sensored:

- It must use a six position JST ZH connector model number ZHR-6 or equivalent connector with 6 JST part number SZH-002T-P0.5 26-28 awg contacts or equivalent.

Wire sequence must be as follows:
Pin #1 - Black wire ground potential
Pin #2 - orange wire phase C
Pin #3 - white wire phase B
Pin #4 - green wire phase A
Pin #5 - blue wire temp control, 10 k Thermistor referenced to ground potential
Pin #6 - red wire + 5.0 volts d.c. +/- 10%.
Compatible speed control must use the 6 position JST header part number X-6B-ZR-SMX-TF (where the X denotes the style of the header), or equivalent.

Thankyou terry.sc, I've looked for the sockets but can't find any, lol, and I havnt a clue what would be the equivalent

Try this, socket for JST ZH connectors.
http://uk.farnell.com/jst-japan-sold...713-pd-r2-acce