Advice needed Reedy 410R
 

I'm having trouble with my 410r ......

I bought it 2nd hand and fitted it into my k1 aero , turn the power on and it will work however it won't brake .

I've read the manual on setting it up and even watched a video on YouTube but I still can't get it to set the brakes . In set up mode one flash on green light to set full throttle , 2 flashes to set neutral and 3 for brakes .

It won't get passed 2 flashes ( setting neutral )

Getting aggravated :(

Can anyone help ?

Maybe end points on your transmitter? Can you turn the brake up, if so put it to max and try to re calibrate.

I checked my epa and both throttle and brake are at 100% like it says in the manual .

Have you got any expo on the brakes?

I'm not sure what you mean ?

Im not sure what I did differently but I've managed to get it to set brakes . It's In the wrong default set up for buggies but I have brakes now which is a start .

My five cents worth...if you are still not getting enough break, also check your pinion size as larger pinions are more difficult to slow down.

From memory some brands of radio gear need the servo reverse switch turning to opposite. Then re calibrate. (It's a vague memory though so I may be wrong.)