tool set
 

Does anyone make a descent nut driver and hex druver set for sensible money. Need to get a decent tool set up for my KF2.

Arrowmax do decent stuff. I started with a set from "dynamite" (I think) which had various drivers with a ratchet handle.
eBay has lots of sets
http://www.ebay.co.uk/sch/i.html?_fr...ls&_sacat=2562

Typically you will need 1.5 2 2.5 mm Allen key, 5.5 and 7mm socket. Not had a Schumacher so can't say for sure
Body reamer useful

Thanks any other recommended tools ?

I use these, they are a really good fit. I was surprised how good they are.

http://www.hobbyking.com/hobbyking/s...dProduct=84089

http://www.hobbyking.com/hobbyking/s...dProduct=84054

http://www.hobbyking.com/hobbyking/s...600_1_m(5).jpg
http://www.hobbyking.com/hobbyking/s.../43614_1_m.jpg

I use the Arrowmax tools and have found them to be very good, available locally too.