Steering bell issue YZ4
 

I bought the aluminium servo mount for my Yz4 and have fitted a Savox 1258TG for the buggy. But when fitted I noticed the steering was tight and on further inspection noticed the steering bell is rubbing the front of the servo. Has anyone else had this problem? I peeled off the plate on the front of the servo with the details on and it still rubs the plastic case slightly.

Thanks

Matt

Please post a photo.

Here you go

And again

I am not sure why they chose to use bigger bearings on the plastic parts, their line of servos is probably slimmer. If it is a major issue, you can solve it by using the aluminium bellcranks Z2-201BA and four 5x8 bearings.

Thanks Mes

You are welcome!