Inverse Rake Rideheight?
 

Been looking at a few example setups for the CAT SX. Why do people run the front higher than the rear on them? On a real full size race car you'd never do that as it would put air under the car and generate lift.

rrrm mk1 escort, ford capri,

As far as I know we don't run the front higher than the rear.

Personally I aim for the front to be a tad lower, as it lifts on power.

Are you sure that you arent getting mixed up with Diff height?? High at front and Low on Rear??

Nah I was reading some setups posted on the RCMech forum thread. I guess they weren't authoritative ones ;)

Try Chris Longs setup on page 3 of the setups.Its the best by far but make sure you dont run a lipo thats too light. Thats where i have been going wrong.

Thanks will take a look at that.

:) Thanks Chris.
If anyone has any questions then do feel free to PM me, I really don't mind atall and will help with anything.

Im running my car with normal rake. 1-2MMs lower in the front, arms level in the rear. Works pretty well