oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Yokomo (http://www.oople.com/forums/forumdisplay.php?f=21)
-   -   YZ2 Low profile servo (http://www.oople.com/forums/showthread.php?t=175039)

CARB 12-12-2015 10:03 PM

YZ2 Low profile servo
 
Hi
I have been looking to put a low profile servo in my YZ2 has anyone fitted one that has not failed or striped its gears
Thanks
Neale

neallewis 12-12-2015 10:16 PM

Using the plastic horn should save the gears on a low profile, ie. the plastic horn splines should strip first.
Personally I'd rather run a full sized servo.

XpertRC servos are great.
http://www.rccarshop.co.uk/index.php.../xpert-rc.html

danDanEFC 12-12-2015 10:50 PM

I have ran an xpert LP servo in my Yok, with no problems.

Like Neal said, I ran mine with a plastic horn.

discothesnake 12-12-2015 10:54 PM

Futaba BL551 is a great servo. Use these in my 2wd's and never had an issue.

mes 13-12-2015 08:43 AM

+1 on the Futaba servos. My son and me ve been running a S9571 and a KO Propo one10 response with alumimum horns in our Firebolts and they have taken quite some abuse without any damage. We moved them to our TCs meanwhile. I guess you'll be better off with a full-size servo in the long term, unless you want to reduce weight on the front end on a low-grip track.

CARB 13-12-2015 04:10 PM

Hi
Thanks, I think the full size is the best option after all.
Neale


All times are GMT. The time now is 04:54 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com