Speed Passion Reventon Sensorless Motor
 

Hallo everyone, my names Jaco, i recently bought a SP Reventon esc & motor combo through RCmart.... got it yesterday, did the setup per manual, the motor responds through the 3 Radio setup steps, But then doesn't work at all after setup..... Any ideas on how to get it running ? Living in South Africa isnt exactly cheap when you buy the stuff you really want ;p so I would appreciate some help on this matter ....

First thing to check is your wiring and the sensor wire are connected correctly !

Then is throttle reverse or not on the radio !

I run Futaba and it has to be set to reverse or the esc doesn't work

Try these two sets then get back

Its the sensorless motor :p.... now it runs in reverse only lol , im using the radiolink 4ch RC4G with int gyro radio system

I thought all the reventon combos were sensored?

Got it !! thank you so much Mate !! appreciate the help !!!!!

hehe, No Matt. theres 2 versions http://cdn.rcmart.com/images/speedpa...ft-combo-1.jpg

If its sensor less, check that the motor wires are in their right places, I've a to a, b to b, c to c.
Provided they are, reverse the throttle channel on your tx and re calibrate.