Nitro Spring Clean
 

First up is a set of 1/8th scale truggy wheels & tyres, Hong Nor Predators on black HPI non-offset 17mm hex dish rims. Tyres in excellent condition and the wheels are spot on with no damage, there's a bit of glue overrun on the wheels as you can see. Used for 2 x 5 minute heats.

£20 posted.

http://s1d3.turboimagehost.com/t/1137685_Photo0089.jpghttp://s1d3.turboimagehost.com/t/1137686_Photo0090.jpg

HoBao #21016, Carburetor bolt setting pin. BNIP. This will fit a Hyper 21 & 28 crankcase.

£4 posted.

http://s1d3.turboimagehost.com/t/1137682_Photo0085.jpghttp://s1d3.turboimagehost.com/t/1137683_Photo0086.jpg

Fastrax (FAST953) 1/8th pipe/manifold rubber coupling in blue. BNIP. Very strong and thick rubber.

£4 posted.

http://s1d3.turboimagehost.com/t/1137684_Photo0088.jpg

STS D21B, has a brand new piston/liner/conrod/head button so needs running in. Had new bearings in the summer too so is a very good engine for someone. Quick in a truggy and ballistic in a buggy, very underrated engines these.

SOLD

Hong Nor PI-809 EFRA-2047 tuned pipe, has a few small dents and some burnt fuel marks but is in perfect working order. Very good pipe for a .21, made the STS above absolutely fly. Not cheap new.

SOLD

Prices lowered.

Some more bits..............

Electric start (tiger drive style) for GO engines, hardly used. This is designed for the .28 engines.

http://s1d3.turboimagehost.com/t/116...tric_start.jpg

£8 posted.

RB S7 heatsink, in used but good condition. No damage to the fins.

http://s1d3.turboimagehost.com/t/1169554_Photo0112.jpg

£7 posted.

RB S7 crankshaft, in used but good condition.

http://s1d3.turboimagehost.com/t/1169555_Photo0113.jpg

£7 posted.

RB S7 backplate, in used but good condition.

http://s1d3.turboimagehost.com/t/1169556_Photo0114.jpg

£5 posted.

RB S7 carb, in used but good condition. May fit other RB's.

http://s1d3.turboimagehost.com/t/1169557_Photo0115.jpg

£8 posted.

Will do all the RB bits for £20 posted.