![]() |
PRS1v3 Setups
1 Attachment(s)
Here's my setup from Today's Turf War Race at Southport Indoor (Astro).
|
1 Attachment(s)
|
1 Attachment(s)
My setup with block tyre on mixed carpet
|
any way to make that setup attachment larger? Its hard to read on my laptop
|
1 Attachment(s)
Here's my setup sheet from the last round of the Silverstone Winter masters.
Kev |
You run any weight in the middle like the worlds setup Kev?
|
Quote:
|
Quote:
Jimmy |
Silverstone setup
1 Attachment(s)
Here's my setup from yesterdays Silverstone WS.
|
Quote:
|
Quote:
|
Ran the PR for the first time tonight using kevs setup as a start. I ran yatabe rather than aesprings and no weight but everything else was the same.
A very easy car to drive. I had 5 minutes practise and put it 8th out of 40 after round 1 which for me is good run. Ended up b1 and finished 1st which considering it was the first time out was pretty good. A really good car to drive. Very consistent....I think I only crashed 3 times all night. On the pace of other cars whom I have been way off pace of recently. Thanks to kev and puppy for the support. |
Quote:
|
Quote:
get some weight in it and you'll find it settles the car and will be able to push it harder Puppy |
I find running saddles in mine settles the car, especially over bumps, no need for extra weight to be added.
|
Quote:
|
Ran at Silverstone again last night. The only change I made was the gearbox stiffener and 50g of weight under lipo.
A mixed night. Only qualified c6 and car felt twitchy. Unfortunately the other thing I'd forgotten id done is tighten the slipper and this completely changed the car. Adjusted for the final and what a difference. Average lap 20.7 and best 20.2. Really consistent not a single crash. Finished c1. |
Quote:
|
Hi All,
What's a good starting point for pinion size on a fast astro track? Standard spur and 6.5r motor. Thanks in advance. Martin |
I would start with a 24 possibly going up to 25
|
All times are GMT. The time now is 05:10 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com