oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Schumacher (http://www.oople.com/forums/forumdisplay.php?f=46)
-   -   KF2 low grip setup help (http://www.oople.com/forums/showthread.php?t=172907)

Dkfream 13-10-2015 10:37 PM

KF2 low grip setup help
 
Can anyone point me in the right direction to get a good base setup for Worksop for my KF2 in low grip please :thumbsup:

Thanks

racdeaf 14-10-2015 07:20 AM

Nathan Waters's set up at worksop 27/09/15

http://www.racing-cars.com/images/Te...orksop_rd1.pdf

mark christopher 14-10-2015 05:23 PM

Quote:

Originally Posted by racdeaf (Post 928894)
Nathan Waters's set up at worksop 27/09/15

http://www.racing-cars.com/images/Te...orksop_rd1.pdf

if you read the set up sheet, Nathan ran mid configuration as did most at worksop, not low grip as was asked for

HarlowS 15-10-2015 05:22 PM

1 Attachment(s)
If only somebody made some Brass transmission housings to get more weight further back, perfectly balanced ........ :thumbsup:

racdeaf 15-10-2015 07:00 PM

Quote:

Originally Posted by mark christopher (Post 928942)
if you read the set up sheet, Nathan ran mid configuration as did most at worksop, not low grip as was asked for

ah ! time for me to nip in spec saver ..
now where did i put that coat ? :thumbsup:

Dkfream 15-10-2015 07:24 PM

Quote:

Originally Posted by HarlowS (Post 929041)
If only somebody made some Brass transmission housings to get more weight further back, perfectly balanced ........ :thumbsup:

Do you make these ???

Gayo 15-10-2015 07:41 PM

Wow! That must weight 100g! :woot:

HarlowS 15-10-2015 08:11 PM

Not quite, 52g brass over 17g alloy.

Quote:

Originally Posted by Gayo (Post 929069)
Wow! That must weight 100g! :woot:


HarlowS 15-10-2015 08:12 PM

Im working on them at the moment yes. :)

Quote:

Originally Posted by Dkfream (Post 929066)
Do you make these ???


butty1978 21-10-2015 10:22 PM

I have mine from round 1 can not say its the best but its what I used in the final and was clearly my best run of the day.

Tried to add on here but struggling so if you still need one I can email it if you want.


All times are GMT. The time now is 08:34 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com