x6 speedo location
 

whats the best way of securing the speedo in the 2 cell section ?

cheers

stick a square piece of lexan or carbon or acrylic etc that fits nice and snug into the 2 cell slot area so you have a sturdy base for the speedo to stick it down to with double sided

thanks mike was thinking along those lines

As mike said, i have found that the lrp speedos fit well with the cap beside them in the 2 cell position.

I think this is an excellent piece of inter company communication and forward thinking. Well done LRP and XFactory :D

i have a bit of carbon spare so i think i will cut that up and stick it down on that

mate lead weights in the bottom make it perfect height .. and help balance too..

same as leon, two strips of lead and double sided tape,

where can i buy some lead ?

pbm models. or your local tyre fitting place...

schumacher do some core rc lead thats quite nice stuff..

any were that balances wheels.

Any one know the accurate dimesions of the 2cell box I am not at home at the moment

46mm across x 49mm would be tight

thanks

anyone ever installed a speedpassion gt in to an x6 ? its got quite a large footprint compared to some other speedo i have seen . pics would be a great help to

mate just put one in the 2 cell place looks well neat and the reciver the othere side and pt and switch the otherside

if that makes any sense.