![]() |
Losi 8ight 2.0 differences
What parts are actually different on the 2.0? :eh?:
G |
Far more than just looking at the piccies would suggest.........
Body, wishbones, rear hubs, rear hinge pins, fuel tank, shock towers, chassis, all driveshafts, brake discs, radio tray, steering/servo saver and many other samll improvements and material changes too. In total there are 32 changes listed on the side of the new boxs!! (although many are minor or just refinement) |
Cheers Darren, but what changes will actually make a difference to a bod like me? --- And don't say none of them! :lol::lol:
G |
Quote:
The longer chassis is going to be most noticeable, the other bits will mainly help it stay together for longer for a "bod like you", lighter and tougher where the main changes made, faster was hard to already do in the "Losi eyes" (in their opinion) |
G-Wizzzzz!!!
Rear wishbones---Bigger outer hinge pin screws Rear Hubs---Bigger outer hinge pins screws and extra hole for camber link Rear shock tower--- lighter and revised mountings for camber links/shocks Front and Rear brake discs---thicker less chance of fade Brake hardwear--- to accomodate thicker discs Chassis---longer by 2mm? Rear centre CVD---longer by 2mm?? Front Hubs--- revised camber holes Front shock tower--- lighter/revised camberlink/shock mounting holes Bodyshell--- improved airflow across engine ARB--- etched to identify size easier Steering bellcrancks---revised geometry?? Steering rack--- bushed to give less play Suspension Balls---smaller size lighter weight Fuel tank---???? Radio Tray--- more room around the servos Thats all i can think of at the Mo.....:drool: JIm:p |
Yeaaaah - Jim's back.
Good holiday? |
Supa dupa holiday thanx:D
|
Are we rally x ing sunday or regionaling :)
|
You coming Lee?
|
No it's just the way i'm sitting.
But i am tempted if i can get a roll bar mount for it |
where u lads running
|
NNRC shane, its over blackpool way.
|
ouch blackpool :o bit to far for me
|
have you got directions to it Lee ?
|
Lee, this may be a stupid question, and show I don't know what day it is - but,
why are you not in Florida? |
Long story stu, but the project i was working on went tits up monday, so i was meant to try and sort it out tues/wed and then the company who was going to take over pulled the plug too.
So it been a gash week but at least i know how to unstick my fingers now if i superglue them together. Neil: i dont but stu could help you out there,i'll need a post code too to get me somewhere near.:D |
http://www.northernracer.com/posted/55.jpg
Dingle Farm, near Clifton- just outside Preston on the old Blackpool road. Quote:
|
shame theres nowhere more centrel so we could all meet up
|
Shane - I imagine it's not that bad for you to get to.
It will be motorway all the way from Hull, and if Garry and Neil are going maybe you could car share? I rekon it's about 100 mins drive if you get some spuds on. |
or we all could meet somwhere in the middle ;):woot:
|
All times are GMT. The time now is 06:27 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com