oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Wanted (http://www.oople.com/forums/forumdisplay.php?f=7)
-   -   battery charger (http://www.oople.com/forums/showthread.php?t=16686)

dr durga 06-12-2008 05:48 PM
battery charger
 
hi guys does anyone have a new or secondhand carger which can also charge lipo? 60 pound max

footey 06-12-2008 06:05 PM
hi m8 ring mb models as mike sells chargers that will do both lipo and normal cells for less than that number in my sig;)

dr durga 06-12-2008 06:09 PM
hmm ok ill do tht tomoro... just found this i is ok? http://www.modelshopleeds.co.uk/cata...93bf01d0af9dfa

i4n 06-12-2008 06:27 PM
I (and a few others I know) use one of these:

http://www.actionmodelcentre.co.uk/p...od=JPD-4402900

I've used it with both Ni-Mh and LiPo and it is one of the best chargers I have used, I prefer to use it over my Much More CTX charger which cost about 3 times as much!

You'll need a power supply with it too if you haven't already got one - the one I use is http://www.modelsport.co.uk/?CallFun...n&ItemID=23410 but there are loads of others out there, just make sure it is powerful enough (better to pay a bit more now for a quality product then get a cheap one and have to buy the quality product in a few months time - I learnt this the hard way :mad:). If you want to get both from the same place this charger is also good http://www.modelsport.co.uk/?CallFun...n&ItemID=29476, I've seen a Schumacher sponsored driver using it.

Ian

bmx833 06-12-2008 06:39 PM
if i would you i would get the imax b5 from modelsport, 62.29? ithink posted it was.
charges and balances all my batteries and never had any problems with it, great charger for the price
also i had that xbase before but it couldn't balanceand everyonce in a while it would false peak
just my 2cence

Brad

dr durga 06-12-2008 06:53 PM
Quote:
Originally Posted by i4n (Post 184808)
I (and a few others I know) use one of these:

http://www.actionmodelcentre.co.uk/p...od=JPD-4402900

I've used it with both Ni-Mh and LiPo and it is one of the best chargers I have used, I prefer to use it over my Much More CTX charger which cost about 3 times as much!

You'll need a power supply with it too if you haven't already got one - the one I use is http://www.modelsport.co.uk/?CallFun...n&ItemID=23410 but there are loads of others out there, just make sure it is powerful enough (better to pay a bit more now for a quality product then get a cheap one and have to buy the quality product in a few months time - I learnt this the hard way :mad:). If you want to get both from the same place this charger is also good http://www.modelsport.co.uk/?CallFun...n&ItemID=29476, I've seen a Schumacher sponsored driver using it.

Ian
why do i need a power supply?

mark christopher 06-12-2008 07:32 PM
i have one for £20 plus postage

Simprop Intelli-Control V3 Charger
http://www.helihobby.com/assets/imag...clearpixel.gifhttp://www.dynawebs.net/commonImages/v.jpg http://www.helihobby.com/assets/imag...clearpixel.gifhttp://www.helihobby.com/assets/imag...clearpixel.gifAll Helis
http://www.helihobby.com/assets/imag...clearpixel.gifhttp://www.helihobby.com/commonImage...ain/SI1036.jpg

The Inteli Control V3 goes beyond your normal Charger with lots of extra sophisticated programming. Gives fully automatic charging of NiCads and easily adjusted manually set charging of NiMH Lithium and Lead Acid batteries. Even comes with a built in cooling fan so you may charge continuously without over heating. The manual setting only requires you to set: Battery type (Nicad NiMH etc) Number of Cells Capacity Charging Current. You can also set discharge current for NiCad and NiMH to cycle the batteries and cycling can be set to be done from 1 to 99 times automatically. Pleasantly clear instructions are included. Very advanced controls.
http://www.helihobby.com/assets/imag...clearpixel.gif
195.00
http://www.helihobby.com/assets/imag...clearpixel.gifhttp://www.helihobby.com/assets/imag...clearpixel.gifhttp://www.helihobby.com/assets/imag...clearpixel.gifhttp://www.helihobby.com/assets/imag...clearpixel.gifhttp://www.helihobby.com/assets/imag...clearpixel.gifhttp://www.helihobby.com/assets/imag...clearpixel.gif

dr durga 06-12-2008 07:38 PM
ill be able to buy it near christmas day... my mums buying for christmas... keep though... but someone has to awnser my power supply question first

i4n 06-12-2008 08:01 PM
Quote:
Originally Posted by dr durga (Post 184817)
why do i need a power supply?
Because they are both 12V chargers. You could use a good 12V battery (such as a leisure battery) but for ease of transport if you race inside a lot a power supply is your best bet.

The majority of the "competition" spec chargers are 12V. The ones aimed at the backyard basher etc, are the one's that are 240V.

Col 06-12-2008 08:02 PM
because all decent chargers run off 12volt supply, not 240volt house supply. You need the power supply to reduce the voltage to the required amount.
A supply is not needed if you've got a superb car battery or a lesure battery to run from instead.

EDIT beaten too it...

i4n 06-12-2008 08:08 PM
........sorry Col!

JCJC 06-12-2008 09:52 PM
Quote:
Originally Posted by dr durga (Post 184835)
ill be able to buy it near christmas day... my mums buying for christmas... keep though... but someone has to awnser my power supply question first
Because most of the time you are in a field and a car or leisure battery is your only power, generators are being used more, if you have 240 volts then a power supply will allow you to use your 12volt charger. I use a BC6 which is 12 & 240volt, but close to £100 new.

Get down to a club and see whats what, ask questions and see what people are using and why.

jim76 06-12-2008 10:46 PM
the Bantam BC6 is the best alrounder out there. Does NiMH cells and Lipo (balancing). Runs from 12v or 240v.
It is around £100 as JC said, but if you can find a second hand one it would be well worth getting. It would cover you for most cells for years.

have a look on ebay maybe

dr durga 07-12-2008 10:09 AM
Quote:
Originally Posted by jim76 (Post 184879)
the Bantam BC6 is the best alrounder out there. Does NiMH cells and Lipo (balancing). Runs from 12v or 240v.
It is around £100 as JC said, but if you can find a second hand one it would be well worth getting. It would cover you for most cells for years.

have a look on ebay maybe
none on ebay... 1 with a reserve but you know... oh well i think i might go with the imax b5 from modelsport unless mark christopher pmes me a pic of his...i need to see the condition :p thanks guys you have really helped :p

mark christopher 07-12-2008 10:25 AM
its as new and is the same as the pictures, it has original box and instructions

JCJC 07-12-2008 10:33 AM
Looks a good buy to me, & Mark knows his stuff, if Frogger still has one of these you are set up, http://www.oople.com/forums/showthre...172#post183172

why ain't you out at the track looking round

dr durga 07-12-2008 10:48 AM
Quote:
Originally Posted by mark christopher (Post 184926)
its as new and is the same as the pictures, it has original box and instructions
could you sorta keep that untill near christmas... ?? cause i will def be able to buy... and ill be able to get the battery :p

mark christopher 07-12-2008 11:10 AM
if its sold else where it goes, xmass is 2 weeks away, much longer and you will miss the xmass post anyway


All times are GMT. The time now is 11:46 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com