oOple.com Forums - X5 Squared

oOple.com Forums (http://www.oople.com/forums/index.php)

- For Sale (http://www.oople.com/forums/forumdisplay.php?f=6)

- - X5 Squared (http://www.oople.com/forums/showthread.php?t=16494)

Selling my X5 due to no longer running it!

Car:
X5 squared chassis/White bits (belt access etc)
Standard X5 pulleys (new x5 squared pulleys included in spares - see below)
Front One Way
E speed front/rear shock tower braces, rear camber brace
X factory front hub screws
Shell Brand new uncut/unpainted, with brand new rc edit wing
One stripped screw needs drilling out on bottom belt access, and front belt tunnel piece thing to prevent dirt getting in broken (the insert with the cut out that goes in? Still goes in and does the job fine!), other than that all ok
Only used for 3/4 meetings

Spares:
3 Full sets of wheels BNIP
X5 squared new type pulleys (the ones from the latest batches)
Belt
X5 squared chassis (unused)
Full set front and rear graphite Wishbones
1 pair Steering spindles and front hubs
1 pair rear hubs
Pre dremelled rear shock tower
Front shock tower
Front bulkhead
Rear inner hinge pins
E speed steering link
Various odds and sods

Looking for £200 Inc. Postage, £230 with BNIP Tekin 5.5 sensored redline motor

Comes with x5 build manual

Edited original post for more info on spares

Some more of the spares included:

Fiberlyte front tower brace
Spare spur
Blue pistons
Orange pistons

Will chuck in a set of unused minispikes too

£170 including post!

http://img57.imageshack.us/img57/5013/p1000440zi9.jpg
http://img57.imageshack.us/img57/p10...jpg/1/w320.png

These aren't all the spares, just some of them I could drop on the floor quickly!!

Some spares not mentioned earlier are XX4 front CVD's BNIP, and also steering linkage stuff from an XX4 too.

Assume no spare rear wishbones by the way, when chucking the shocks on tonight I think the shock mount hole for the screws on the rear wishbones is threaded so may need changing!